Winter 2021-22 Antique Pistol Restoration Project

Antique "Sterling" .38 cal.rimfire restoration project update...

  It seems that I could have bought an E.L.Dickinson "Parts gun" a couple of weeks ago, but I passed, not realizing a the time, th...

Wednesday, January 26, 2022

Under Hammer Muzzleloading Pistol Designs...

 Under Hammer Muzzleloading Guns were created for a more accurate firearm by removing the Hammer from the shooters line of sight, and instead put the Hammer on the underside of the gun as shown in the two diagrams below.





There were several gunmakers around the world who made models of Under-hammer Muzzleloading Pistols and Rifles.











Monday, January 10, 2022

Researching an Antique Arms collection...


 Three quarters of the time I spend on my Antique firearms hobby is spent reading books & periodicals, searching through photographs and online resources.

I discovered how to properly disassemble the Remington-Smoot #2 revolver from the original directions printed on the box the Revolver was packaged in.
I found the picture of the box label within the Standard Catalog of Remington Firearms Book.




The Norwich Pistol Co. "Protector" .32RF Revolver wasn't as difficult to research as other "Spur trigger" Revolvers, as it has a Patent date and tradename engraved on the barrel.
I discovered that a Hardware sales & distribution company called Maltby, Curtis & Co. founded the Norwich Pistol Co.




Tuesday, January 4, 2022

Monday, January 3, 2022

Antique "Sterling" .38 cal.rimfire restoration project update...

 


It seems that I could have bought an E.L.Dickinson "Parts gun" a couple of weeks ago, but I passed, not realizing a the time, that all the parts inside that ugly looking project gun would work in my Sterling.

It's not so bad, I had yet to learn  that E.L.Dickinson made my Sterling, and of course,  I did acquire the Forehand & Wadsworth "Russian model 32" fix'er up pistol,  the Remington Smoot new model #2 in VG condition and a few other miscellaneous, essential  parts etc...

I have over paid for a couple of parts related  things and then I  got a real deal on others, and some other items are held up for inspection with Canada Customs, but slowly things are coming together.

Now that I have solved my cylinder axis pin problem,  I have to get the hacksaw &  files out and custom fit the steel rod blank I am going to use to fabricate a replacement base pin or cylinder axis pin for this Sterling revolver.

Someone posted the next few  photos at a gun forum, that show how the trigger + cylinder bolt-stop assembly go together, sort of...





Here is an article from "American Gunsmith" that includes disassembly instructions for an Iver Johnson Defender'89 revolver, which is close enough in mechanical design to my Sterling revolver, that it is very helpful!






Wednesday, December 29, 2021

Remington-Smoot no.2 Repair #1







I bought this revolver knowing that it is missing the ejector retaining ring. This is part: "d" in the Patent drawing, and can be seen at the lower right hand side of the page above.
 
As seen in the Patent drawing above, I have since learned that the ejector retaining ring is attached to the cylinder base pin.

Without a quick & simple way to remove the cylinder, a black powder cartridge revolver would not be popular among the gun buying public.

It is also used as a handle to pull the cylinder base pin out while disassembling this revolver as described in the "directions for use" which is found  on the original box.




Video - Remington-Smoot new model #2 pocket revolver


 

The fellow who sold me this Remington-Smoot new model no.2 revolver had made this brief shooting range video demo of this .32 cal.rim fire revolver, however, I suspect that he is only firing blank rounds.




Saturday, December 18, 2021

My Remington-Smoot New model no.2 Revolver!!!

This example of Remington's name & Patent info stamped/engraved on the topside of the barrel is perfect! Too bad it's not a photo of  the one that I just bought, or who know? Perhaps the top of my barrel will be just as nice.


The following two photos were taken by the seller:
 

 
There is one repair needed. The ejector rod retaining ring is missing.
 I should be able to find or make a small steel ring, and then use silver solder and torch, or JB-weld to securely attach it ...

***Update: the Remington-Smoot New model No.2 arrived, and looks great, better than in the sellers photos, it could be 90% of the factory nickel finish remaining, and it's as close to perfect  mechanically as both my Colt and S&W revolvers are!
I have to do some work on cleaning and restoration on some black powder marks around the breach and cylinder, but it doesn't appear to have any rust.
This revolver is definitely a shooter..

New photos will be posted after it's cleaned up.

Handloading for Antique Rimfire Guns: Custom Brass Cases & Heeled Bullets for .32 caliber Rim-fire


Antique Black Powder cartridge firing pistols, revolvers & rifles are brought back to life thanks to a simply elegant idea of reaming out an off-center primer pocket that is sized to seat 6mm blank cartridges for primers! By loading the cartridge so the off-center primer's rim is in line for a hammer to strike it, an old gun chambered for a long obsolete cartridge can be brought back to life.

This is the first post of a series documenting my personal black powder cartridge & muzzleloader gun  reloading process, including my tools, reference books and components.

*The photographs I am using to start this post were taken by the person I have bought the Heeled bullets from. 
I will be replacing these photos with my own, once I have photographed the steps of my reloading process.

 My Reloaded .32 Short and .32 Long Rimfire cartridges will be used with my "safe to shoot" single action spur trigger revolvers, including the  Smith & Wesson no.1½ "New model", Colt "New-Line" 32 and Remington-Smoot "New model" no.2, and maybe the Norwich "Protector".


It has taken me a while to accumulate all the necessary reloading components, and now I  have 25 of the custom machined Brass Cases for  .32 caliber Rimfire Pistols, Revolvers & Rifle's , and ten more slightly larger cases  for .38 calibre Rimfire guns.
Both cases have off-center primer pockets that accept 6mm/.22RF Blanks, and are filled with Pyrodex or Black powder, then the powder is compressed by seating the projectile.

The custom machined reloadable brass cases cost me approximately $10 each after shipping is included, but it's not so expensive considering that they can be reloaded 30 to 50 times, depending on how well they are cleaned and cared for.

In my little reloading components stockpile, I  have several hundred of two different styles of cast bullet, based entirely on the  original .32 caliber Heeled Bullet design , and weigh between 90 to 100 grains....I also have four or five 100 round boxes of Hornady .310" and .315" Lead Roundball, which are a good substitute for the heeled bullets.
I think that the .310" Roundball weighs 45 grains and the .315" Roundball weighs 50 grains. They are both about  half the weight of the bullets and should achieve a higher muzzle velocity than the heavier bullets.
I only have one box of 100 Hornady .375" lead Roundball to use for the .38 caliber rimfire cartridges, but it will be a while before my .38 caliber rimfire revolver is restored back to shooting condition, and even then, I think it would be safest to shoot the Roundball, instead of a bullet, with a light load of black powder.



I have put together a compact,  Field Reloading kit, which includes several repurposed vintage and modern  reloading hand tools for depriming & case conditioning, and  small, bench vice for seating the 6mm Blank cartridge and then to seat the projectile and compress the black powder load.

Future "Handloader" posts will look at 12 gauge shotshell blank reloads with 2½"  Magtech Brass shells and my .44Special/Russian reloading kit and with my Lee Hand Press + RCBS 12ga. "Cowboy" reloading Dies