Norwich Pistol Co. "Protector" .32 caliber rim-fire Revolver

I made a replacement cylinder hand spring, which works well, but the cylinder hand may need repair, and in the meantime I have it half functioning as the hand helps lock up the cylinder , but  it needs to be indexed by hand.

I have yet to shoot this revolver, however it is in excellent condition, and the barrels bore is rust free, so I plan to shoot it sometime soon.

I bought this nickel plated antique revolver last year, and it has been enjoyable learning the history of this, and other other antique revolvers made during the late 19th century.

With only the two lines engraved on the top and left side of the barrel, I found the US Patent dated April 23, 1878.

The Patent was filed by W.H. Bliss, and is for the circular, one piece side plate/hammer axis pin

The trade name "Protector" was mentioned in the 1958 book called "Suicide Specials", however, not all the information seems to be 100% accurate, but most is useful.

The Canadian RCMP has a Firearms Reference Database, or FRT, which states that this revolver was made by the Norwich Pistol Co./Norwich Falls Pistol Co. in Norwich, Connecticut, USA

In 1880 my Colt New-Line .32RF sold for around $10, and the Norwich Pistol Co. Revolver was available for under $3...and when you compare the two, side by side, there is no comparison, the Colt is like a Corvette and the Norwich gun is a Chrysler K-car.

Norwich, Connecticut was a gun making city, and more than two dozen manufacturers were located in late 19th century Norwich.

.32 Caliber Rimfire Metallic Cartridge Ammunition

The original black powder .32 caliber rimfire short and long cartridges were very popular in the 19th century, and  many rifles and revolvers were  produced for that chambering from approximately 1860 to the early 20th century.

Above is the .32 caliber Rimfire cartridge next to the .22 caliber rimfire cartridge.
 

A rimfire revolver can be easily identified by the blade design on the hammer. The blade crushes the rim of the cartridge when firing the revolver.

This is a S&W No.1½ "2nd model" that accepts either .32 short or long rimfire cartridges.

The Smith & Wesson No.2 "Tip-up" Revolver and the smaller No.1½ Revolver were the first .32 caliber rimfire revolvers S&W produced.

My Antique firearms Bucket List

Hopkins & Allen's "XL" series of revolvers were the company's highest quality products that bare the H&A brand-name.

The XL No.4 was the .38 caliber Rimfire model.
 

Colt New Line pocket revolvers were available the same year (1873) as the Single Action Army/Peacemaker and although I proudly own a Colt New Line .32 caliber Rimfire, I would very much like to add the .38RF and .41RF models to my modest little collection.

American Revolvers: mail-order catalogs

American Revolver advertising circa 1870's-90's

 

 

 

New photos of my antique spur trigger .32cal. rimfire revolvers!

 

First is the Smith & Wesson No.1½ New Model/2nd Issue .32cal.Rimfire Revolver resting on the pistol case I recently purchased for it.

Before Smith & Wesson figured out their "Top Break" revolver design, the first series of revolvers were the "Tip up" design.

.32cal.rimfire Short machined brass cases can be reloaded many times, and use a .22 cal crimped blank for priming the black powder charge. A .315" Hornady lead roundball is a reasonable replacement for the obsolete "heeled" outside lubed bullet the cartridge was designed for.

The high quality Colt New Line 32 Pocket Revolver retains 95%+ of its factory nickel finish, and looks dazzling in every photo!

The unique rimfire hammer and the blade style firing pin make identifying this type of antique firearm quite easy.

The "Colt New 32" revolver is now kept safe in  a very nice, high quality  Colt branded small pistol case.

The third antique cartridge revolver in my collection is my genuine "suicide special", which is a spur trigger ".32cal.RF Long" revolver  manufacturered by Norwich Pistol/Norwich Arms Co. sometime between 1878 and 1886.

The trade name "Protector" and "Patented April 23, 1878" are the only markings on the pistol, other than the four digit serial number on the barrel, frame & hammer.

The birdhead grip has hardwood grip panels in excellent condition.

The Patented one piece circular sideplate/hammer pin is quite an elegant design. It makes accessing the inner action very quick and easy for maintenance or for parts repair/replacement.

With no nickel flaking off, there has to be 95%++ of the original factory nickel plated finish intact, and the only part which needed attention was the cylinder hand and cylinder hand spring.

I fabricated a replacement cylinder hand spring from a piece of the coiled  flat spring out of an antique/vintage alarm clock.